Monday, August 20, 2012

How to Make a Changing Pad


One of my favorite things to sew is anything baby! The last few baby gifts I've made, I've taken pictures as I went, and now I want to share my how-I-did-that's on here...

You'll need...
1. About 1/3 yard of a patterned cotton fabric
2. A bath towel (or about 3/8 yard of terry cloth)
3. (4) 2" x 2" pieces of fusible interfacing
4. Fastener of choice, such as: (1) button, (2) snaps, (2) magnetic closures, etc.
5. Coordinating thread

Cut (1) 13" x 25" rectangle each of cotton fabric and towel.

Round off each corner (I used a plate and traced the curve onto the corner).


On the wrong side of the pattern fabric, mark where you want the fasteners to be, then iron on interfacing in those places.  Below are my fastener markings (or see the red text, where I will show where/how to fasten with a single button and strap, instead of snaps or magnets). Do not attach fasteners at this time!


Cut a strip of your patterned fabric 2" x 25".  Fold in half hot-dog style.  Press flat.  Fold edges into center fold.  Press flat.  Finding the center of your strap, fold both ends down to make a triangular point (remember those gum wrapper chains we made in elementary school? It's kind of like that... see the picture below).  Sew all the way down one open edge of the strap, across the triangular fold, then back up the other open edge.



Place pattern fabric and terry cloth right sides together (I chose the slightly fluffier, or more "loopy," side of the towel to be my "right side"). Place strap between fabric layers, with only about 1" of the ends hanging out. Leaving one short straight edge open for turning, and with terry cloth on top, sew fabrics together with a 1/4-1/2" seam.  Make sure to catch the strap in your seam, so that it doesn't move when turned right-side out.


Turn right-side out.

 

Iron flat, and sew a 1/4-1/2" top-stitch seam all the way around, turning under the open end as you go.


If doing the button/strap route, roll up your changing case (terry on the inside; wrapping the strap around the outside last), mark the inside of the "triangular fold." Sew a large button on the outside at that mark, and you're done!

Feeling through the fabric, find your four "interfaced" spots.  Using the appropriate tools, apply your snaps.  The decorative/outside pieces should be near the small edge of the changing pad on the side of the pattern fabric (the "male" part should be on the terry cloth side).  Place the coordinating "female" pieces on the marked spots in the middle of the changing pad (pattern side).


The magnetic closures were ugly on the outside, so I sewed buttons over the back side to cover them.  The "female" magnetic piece I placed inside the 2 layers, instead of all the way through.  The snaps I put on another pad went all the way through both layers, and holds up much better.

Roll, it up, and there you go!


Snap closure with "pearl" accent on outside of snap
Button with strap

Stay tuned, as I plan on adding How-To's for a nursing cover, decorative wipes case, and personalized burp cloths!


Linking up to:
Alderberry Hill: Make the Scene Monday                    I Should Be Mopping the Floor: Mop It Up Monday
Threading My Way: Threading Your Way                  DIY Showoff: DIY Project Parade
Ladybug Blessing: Handmade Tuesday                       Hope Studios: Tutorial Tuesday
Ginger Snap Crafts: Wow Me Wednesday                  Sew Much Ado: We Did It! Wednesday
Someday Crafts: Whatever Goes Wednesday             Tatertots and Jello: Weekend Wrap Up
Thirty Handmade Days: Pity Party                                 I Gotta Create!: Wildly Original Roundup



14 comments:

  1. I never thought to use a towel what a great idea! Makes it a little thicker and I bet you get better traction. Found you at the Alderberry hill link up! Onceuponasewingmachine.com

    ReplyDelete
  2. This is a great tutorial! I'm in my 2nd trimester and have just started making things for the baby! I've pinned this and added it to my to do list! Thanks for sharing, I can't wait for the nursing cover and burp clothes!

    ReplyDelete
    Replies
    1. Thanks, and congratulations! I plan on adding one more of those baby projects a week (probably on Mondays), until they're all up. Thank you for visiting and pinning!

      Delete
    2. I really love this idea. I have a changing pad pattern that I made about a year ago, but this...the terry cloth. Awesome idea!

      Delete
  3. Cute and soft looking. Love the colors you chose.

    <3 Christina at I Gotta Create!
    Wildly Original Linky party is open!

    ReplyDelete
    Replies
    1. Thanks, Christina! It is really soft (I made the green one for myself). It makes those hard plastic restroom tables a little more gentle :) I added this to the Wildly Original linky party!

      Delete
    2. Fabulous! So thrilled to have you Christine! Thanks for linking up.
      Featuring you on facebook asap: http://www.facebook.com/iGottaCreate

      Delete
  4. Hi Christine, I've featured your Changing Pad Tutorial today... Threading Your Way Features

    ReplyDelete
    Replies
    1. Thank you so much, Pam! I really appreciate it!

      Delete
  5. Found this from the TT&J Weekend Wrap-Up Party. Thanks so much for sharing. I'm always looking for "extra" changing pads and these would make great gifts!

    ReplyDelete
    Replies
    1. Absolutely! They're so easy to make, but so useful when you're done! Thanks for stopping by!

      Delete
  6. Good tutorial. This will make a lovely gift. I've pinned the instructions. Thanks.

    ReplyDelete
    Replies
    1. Thank you for visiting and pinning! The photos on your B-Attitude blog are beautiful!

      Delete
  7. This is such a cute changing pad! Much better than the one that came with my diaper bag! I'm pinning this so I can replace that ugly one I have. Thanks so much! Come over and say hello!
    Stacia@http://feathersandsunshine.blogspot.com

    ReplyDelete

Thank you for visiting! I would love to hear from you!

Related Posts Plugin for WordPress, Blogger...